How To: Download Xiaomi Redmi Note 4 Flash File (Stock ROM)

by

Xiaomi Flash File: You will get the official Xiaomi Redmi Note 4  Stock Firmware ROM (flash tool) for your computer. The firmware is in ZIP format and you will get Xiaomi Redmi Note 4 Flash File, Flash Tool, USB Driver and How-To flash Xiaomi Redmi Note 4 manual. 

Download Xiaomi Redmi Note 4 Flash File (Stock Firmware ROM):

How to Flash Xiaomi Redmi Note 4:

Follow the instructions mentioned below to flash your Xiaomi Redmi Note 4

  • Download and extract Xiaomi Flash Tool on your computer. Install Xiaomi Flash Tool on your computer. 
  • Extract the Stock Firmware ROM you have downloaded in the same folder of Flash Tool. 
  • Now, from the Driver folder (which comes with the flash file) install Xiaomi USB Driver on your computer. 
  • Turn off your Xiaomi Redmi Note 4 and boot in fastboot mode. (Press Power +  Volume Down button for a few seconds). 
  • Connect your Xiaomi A1 device to your computer using a USB Cable. 
  • Now, open the Xiaomi Flash Tool which you have installed previously. 
  • After launching the Xiaomi Flash Tool, click on the select button and locate the Firmware folder from where you extracted the flash file. 
  • Click on the Flash button and the process will begin. 
  • If the process completes successfully, you will see success in the result column. 

Recap: 

  • You have to download the Xiaomi Flash Tool and Firmware file separately. 
  • Firmware comes with a Xiaomi USB driver. But you can download and manually install it if you want. 
  • Last but most important, take a backup of your system before flashing ROM. Because, if something goes wrong, your system will be safe if you have a back up. 

Leave a Comment