Cisco is a global leader in networking. If you are using one of the Cisco routers for your household/business, you should have some basic knowledge about the router. Such as, to change your WiFi name or password, you have to access the web interface of your cisco router.
In this guide, you will know default cisco router username & password, login IP and how to reset cisco router in case you forget the admin password.
What’s the default username and password of Cisco router?
If you are using a Cisco router, you can use the default login credentials to access the web interface unless you have changed the default credentials.
Here are the default username and password:
What’s the default login IP of my Cisco router?
Different Cisco routers have different login IP addresses. Here are some of the most common Cisco router IP address for logging in:
Cisco router login
- Connect your device with your Cisco router using a LAN cable.
- Visit 192.168.15.1/192.168.1.1 from a browser.
- Enter default username and password to login.
Find Cisco Router Login IP
If you are not finding the login IP of your Cisco router, you can figure it out within a minute. Here’s how you can do it:
- Press the Windows button of your keyboard.
- Search for cmd. Right click on Command Prompt.
- Type ipconfig and press Enter.
- Gateway IP is your Cisco router IP.
How to change WiFi name and password of your Cisco router?
- Visit 192.168.15.1/192.168.1.1 or whatever your router login IP is. Login with your admin credential.
- To change your WiFi name, navigate to Wireless > Basic Wireless Settings. In the SSID field, enter your WiFi name. Click Save Changes to change your Cisco WiFi name.
- To change your WiFi password, go to Wireless > Wireless Security. In the passphrase field, enter your WiFi password. Click on Save Changes.
- After changing your WiFi name/password, all connected devices will be disconnected and you have to manually connect again.
How to reset Cisco router?
If you forget your login credentials, you will have to reset your router. A factory reset reverts back everything to the default settings. So that you can login to your admin account with default username and password.
Resetting is a simple process, which usually takes less than a minute to complete. And all routers follow the same reset process.
- Power on your router. Because, a router won’t reset if it’s turned off.
- Find the reset button, which is usually situated at the back side of every router.
- Press the reset button with a needle, paper clip or something similar for around 30 seconds.
- When the reset begins, router signal LEDs will start blinking. And, once the reset process is finished, the router will reboot and the signal LEDs will be stable.
Once the reset is complete, you have to configure everything again like WiFi name, password, etc.